Powering On The Device | How-To

To turn on the ARGO, locate the power button on the left side of the headset (next to the hinge - see screenshot). Press and hold this button for three seconds until an LED light flashes on the front of the ARGO indicating device boot-up.

Scenarios | Low Battery

 
This table indicates low battery scenarios that correspond with the LED color, LED state, and LED action (where applicable): 

Battery	LED Color	LED State / Action	Display	USB-C Plugged In
Above 10%	Red	Solid - LED changes to green when it reaches 15%		Yes
Below 10%	Red	Solid		Yes
Below 5%	1.Green  2.Red>Orange 3.Solid red	Flashes green x2 then alternates between red and orange until it reaches 5% of battery  Once it reaches 5% display changes to off mode charging screen and LED to solid red		Yes
Below 10%	Green	Flashes 5X - Proceeds to boot up after battery icon is display		No
Below 5%	Green	Flashes 5X		No
Below 3%	Green to Blue	Flashes green 4X and turns to solid blue for 2 seconds		No
N/A	Green	Flashes 2X - 3X Left battery is not detected		No
N/A	Green	Flashes 2X - 3X Right battery is not detected		No